Colloid Mill Lab System Scaleable to Full In-Line Production: CZ-110 (V11)
News for Immediate Release
COLLOID MILL LAB SYSTEM
A wet-process, colloid mill laboratory system for achieving total control over the end process for emulsifying, dispersion, and particle size reduce-tion is being introduced by Bematek Systems, Inc. of Salem, Massachusetts.
The Bematek colloid Mill Lab System features a positive displacement feed pump top produce a pressure drop across the rotor-stator gap which yields smaller particle sizes, with higher throughputs, and greater uniformity. Suitable for viscous materials up to 500,000 CPS, this laboratory system allows full control of residence time in the mill to achieve the desired viscosity control and uniform size of both emulsions and dispersions.
Capable of producing uniform particle size reduction down to 1 μm with throughput up to 300 GPM, the Bematek Colloid Mill Lab System can be scaled up to full in-line production with accuracies to 95%. The residence time (flow rate) plus the shear rate, defined by the rotor-stator gap and speed of the mill, provides full control over the desired temperature and product characteristics. Two variable frequency drive controllers are included.
The Bematek Colloid Mill Lab System is priced from $24,995.00 up, depending upon configuration. Literature and quotations are available upon request.
For more information contact:
|Home | About Bematek | Industries | In-Line Mixers | Colloid Mills | News | Services | Contact Bematek | Members | Site Map|